HP ENVY 23-D113A TOUCHSMART REALTEK CARD READER DRIVER DETAILS:
|File Size:||27.4 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
HP ENVY 23-D113A TOUCHSMART REALTEK CARD READER DRIVER
Step 7 Carefully lift the CPU thermal module out of the computer. Step 9 Detach the screw near the radiator end of HP ENVY 23-d113a TouchSmart Realtek Card Reader MXM thermal module. Step 10 Carefully lift the MXM thermal module out of the computer. Step 11 Detach the two small screws on the graphics card Step 1 To replace the graphics card, align the card into its slot at a 45 degree angle. Step 2 Push the card down into the slot and replace the two screws.
HP ENVY 23-d113a TouchSmart Intel Graphics Driver for Windows 8
Hold the card down while replacing the first of the two screws. Step 3 Before replacing the MXM thermal module assembly, first clean the old thermal solution from the MXM graphics card HP ENVY 23-d113a TouchSmart Realtek Card Reader applying a cleaning agent and then wiping it clean. Step 4 Repeat the cleaning procedure on the thermal module. Step 5 Apply new thermal grease or thermal pad to the MXM graphics card. Step 6 Carefully align the MXM thermal module back onto the computer.
Step 7 Tighten the screws over the MXM graphics card. Step 8 Replace the screw near the radiator. Step 9 Before replacing the CPU thermal module assembly, first clean the thermal solution from the CPU by applying a cleaning agent and then wiping it clean.
HP ENVY da TouchSmart All-in-One Desktop PC Product Specifications HP® Customer Support
Step 10 Repeat the cleaning procedure on the thermal module. Step 11 Apply new thermal grease or thermal pad to the CPU.
Step 12 Carefully align the thermal module back onto the computer, sliding the radiator between the MXM thermal module and the system fan. Step 13 Tighten the screws for the CPU thermal module.
HP 23-d113a driver
Step 14 Replace the screw near the radiator. Step 15 To replace the motherboard EMI shield, find the small slot on the side of the shield Step 16 Find the two small holes on the bottom of the EMI shield HP recommends that you put down a blanket, towel, or other soft cloth to protect the screen from scratches or other damage. Use an antistatic wrist strap and a conductive foam pad when working on the computer. Electrostatic discharge ESD can damage your processor, disk drives, expansion boards and other components.
HP strongly recommends the use of the wrist strap and conductive foam pads to reduce the risk of damage to your computer. Remove a component from its protective packaging only when you are ready to install it.
HP Envy 23 Specs - CNET
This product contains components that can be damaged by electrostatic discharge ESD. To reduce the chance of ESD damage, work over a noncarpeted floor, use a static dissipative work surface such as a conductive foam padand wear an ESD wrist strap connected to a grounded surface. Video overview View the following video before using the steps in this article.
Removing the MXM graphics card Use the following steps to remove the graphics card: Step 2 Pull out the USB dongle if it is present in your computer. The EMI shield screw locations are marked with a stencil of an arrow that does not have a circle inside. Free Download HP ENVY da TouchSmart Realtek Card Reader Driver for Windows 8 (Card Readers).
Download the latest driver, firmware, and software for your HP ENVY dc TouchSmart All-in-One Desktop is HP's official website to download Missing: da Realtek.