3COM SPORTSTER 14400 V.42BIS PC DRIVER DETAILS:
|File Size:||9.7 MB|
|Supported systems:||Windows All|
|Price:||Free* (*Free Registration Required)|
3COM SPORTSTER 14400 V.42BIS PC DRIVER
SPORTSTER 9600/PC, SPORTSTER 9600/PC FAX modem/telephone/ISDN Settings and Configuration
Replacing it with other drivers causes other problems related to printing. At least one user has eliminated all of the problems by upgrading their HP Printer drivers from Version 1. The latest Version 1. After this upgrade, cybercomm or wfxcomm should also 3Com SPortster 14400 V.42bis PC correctly without causing printer problems. Another user addressed this problem by installing the commercial SuperPrint package by Zenographics.
Modem. 8-bit ISA
This eliminates the need for bicomm. Configuring Windows 95 The comm port setup has been dramatically overhauled in Windows Windows 3Com SPortster 14400 V.42bis PC users with S3 based video cards should note that it is not possible to configure a modem on COM4. You will have to move the modem to a different port. A number of common issues are: Windows NT 3.
SYS driver. SYS from the NT 3. Windows NT users cannot get the system to recognize the modem hardware correctly. Look for an updated modem. Failing that, it's not too hard to manually edit the standard modem. See the Matrox readme file for a special registry setting that is required.
Configuring Applications The options will depend upon the specific application but, in general, stick to the following guidelines: Set speed as discussed in the previous section. Set Port Speed locked to ON. Set Carrier Detect to ON. Set Software Flow Control to No.
PC Modem Init Strings
Set Data Bits as required by the host normally 8. Set Stop Bits as required by the host normally 1. Set Parity as required by the host normally None.
Set Parity Check as required by the host normally Off. Set Modem Initialization strings as recommended by the manufacturer. Unfortunately, there is a problem with this A UART implementation which may result in system "lock-up" or "hang". This problem is completely unrelated to the comm.
To establish whether your computer has the SMC controller, you will need to inspect the motherboard. If you are unable or unwilling to inspect the motherboard you should check the system documentation of contact the manufacturer.
Solutions to this problem are available but depend on the version of Windows and the comm. Users of Windows 3. Users of Windows for Workgroups 3. In fact, all Windows for Workgroups 3. Both of these files together with a DOS utility and readme's are included in the file serial. My thanks to Peter J.
McKinney mckinney me. Frequent Disconnects Hopefully, the above information will enable you to establish communications.
However, it's possible that you will be plagued by frequent disconnections. You have my sympathies because these problems can be extremely difficult to diagnose and resolve. Unfortunately, every link in the chain is suspect. You will need to look for "patterns".
For example, does the problem occur when communicating with one particular site or many? INF drivers for these USR (US Robotics/3Com) Sportster Vbis PC the current Win 95/98/NT INF files for all 3com / USR modem products excluding. Download 3Com Sportster Vbis PC driver for Modems software now.