GIGABYTE GA-M52L-S3 NVIDIA MCP61 SATA RAID DRIVER DETAILS:
|File Size:||5.0 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other|
|Price:||Free* (*Free Registration Required)|
GIGABYTE GA-M52L-S3 NVIDIA MCP61 SATA RAID DRIVER
Table of Contents Page: The trademarks mentioned in this manual are legally registered to their respective owners. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. For product-related information, check on our website at: Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information.
The box contents are subject to change without notice. Prior to installation, carefully read the user's manual and follow these procedures: These stickers are required for warranty validation.
Скачать драйвер для Gigabyte GA-M52L-S3 (rev. 2.0) NVIDIA MCP61 Chipset Driver 11.10 for XP
If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity. Chapter 1 Hardware Installation Page: Note 3 Available functions in EasyTune may differ by motherboard model. The CPU cannot be inserted if oriented incorrectly. It is not recom- mended that the system bus frequency be set beyond hardware specifications since it does not meet the standard requirements for the peripherals.
If you wish to set the frequency beyond the standard specifications, please do so according to Gigabyte GA-M52L-S3 NVIDIA MCP61 SATA RAID hardware specifications including the CPU, graphics card, memory, hard drive, etc. Make sure that the CPU pins fit perfectly into their holes. Once the CPU is positioned into its socket, place one finger down on the middle of the CPU, lowering the locking lever and latch- ing it into the fully locked position. Completely lift up the CPU socket locking lever. The CPU cannot fit in if oriented incorrectly. Adjust the CPU orientation if this occurs. Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU.
Apply an even and thin layer of thermal grease on the surface of the installed CPU.
Turn the cam handle from the left side to the right side as the picture above shows to lock into place. Refer to your CPU cooler installa- tion manual for instructions on installing the cooler.
GIGABYTE GA-M52L-S3 USER MANUAL Pdf Download.
Hook the CPU cooler clip to the Gigabyte GA-M52L-S3 NVIDIA MCP61 SATA RAID lug on one side of the retention frame. On the other side, push straight down on the the CPU cooler clip to hook it to the mounting lug on the retention frame. It is recommended that memory of the same capacity, brand, speed, and chips be used. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual Channel memory mode will double the original memory bandwidth. The four DDR2 memory sockets are divided into two channels and each channel has two memory sockets as following: Dual Channel mode cannot be enabled if only one DDR2 memory module is installed. When enabling Dual Channel Gigabyte GA-M52L-S3 NVIDIA MCP61 SATA RAID with two or four memory modules, it is recommended that memory of the same capacity, brand, speed, and chips be used and installed in the same colored DDR2 sockets for optimum performance.
Follow the steps below to correctly install your memory modules in the memory sockets. Note the orientation of the memory module. The new S series motherboards GA-M52L-S3; supporting AMD new generation AM2 The brand new NVIDIA® GeForce / nForce MCP (Media and.
Материнские платы, купить материнскую плату - интернет-магазин
GA-M52L-S3 Motherboard Layout. . Making a SATA RAID Driver Diskette (For Windows XP and ) .