Type: Driver
File Name:
File Size: 2.7 MB
17 (4.01)
Downloads: 10
Supported systems: Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners.

Asrock H61M Gs Quick Start Guide GS_H61M S_QIG_ASR

Fan cables ASRock H61M-GS side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Connect fan header with the CPU fan connector on the motherboard.

ASRock H61M-GS 6. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Please be noticed that this motherboard supports Combo Cooler Option C.

ASRock H61M-GS LGA Intel H61 Micro ATX Intel Motherboard -

Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward. PCIE slots: Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the ASRock H61M-GS. Remove the system unit cover if your motherboard is already installed in a chassis.

Remove the bracket facing the slot that you intend to use.

  • ASRock > H61M-GS
  • ASRock- Asrock H61M-GS- ASMBH61MGS- - Solid Capacitor for CPU power.- Supports Intel® K-Series
  • Motherboard layout (h61m-gs / h61m-s), English, Lan phy ASRock H61M-S User Manual Page 2 /
  • ASRock H61M-GS - motherboard - micro ATX - LGA1155 Socket - H61 Specs
  • ASRock H61M-GS User Manual Page 80

Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Fasten the card ASRock H61M-GS the chassis with screws. Replace the system cover. To enable dual monitor feature, please follow the below steps: If you have installed onboard VGA driver from our support CD to your system already, you can freely enjoy the benefits of dual monitor function after your system boots. Please refer to the following steps to set up a surround display environment: Please refer to page 20 for proper expansion card installation procedures for details.


Boot your system. Please make sure that the value you select is less than the total capability of the system memory.


If you have installed the drivers already, there is no need to install them again. ASRock H61M-GS up a multi-monitor display. Right click the desktop, choose Properties, and select the Settings tab so that you can adjust the parameters of the multi-monitor according to the steps below. Click the Identify button to display a large number on each monitor. Right-click the display icon in the Display Properties dialog that you wish to be your primary monitor, and then select Primary. When you use multiple monitors with your card, one monitor will always be Primary, and all additional monitors will be designated as Secondary. Select the display icon identified by the number 2. Click Extend my Windows desktop onto this ASRock H61M-GS.

Buy Bios-Chips, ASROCK H61M-GS, from €, new, incl. Programming

Right-click the display icon and select Attached, if necessary. Set the Screen Resolution ASRock H61M-GS Color Quality as appropriate for the second monitor. Click Apply or OK to apply these new values. Repeat steps C through E for the diaplay icon identified by the number one, two, three and four.

Right click the desktop, choose Personalize, and select the Display Settings tab so that you can adjust the parameters of the multi-monitor according to the steps below. Click the number 2 icon. Click the ASRock H61M-GS This is my main monitor and Extend the desktop onto this monitor.

Click OK to save your change. H61M-GS.

ASRock H61M-GS Capacitor for CPU Power. Supports Intel® K-Series CPU. Supports Dual Channel DDR3 Supports Intel® HD Graphics / Solid Capacitor for CPU Power; Supports Intel K-Series CPU; Supports Dual Channel DDR3 ; Supports Intel HD Graphics /; Supports ASRock  Missing: GS.

Other Drivers