DRIVER: ASROCK G41M-S INSTANT

ASROCK G41M-S INSTANT DRIVER DETAILS:

Type: Driver
File Name: asrock_g41m_14051.zip
File Size: 37.7 MB
Rating:
3.39
6 (3.39)
Downloads: 5
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* (*Free Registration Required)

Download Now
ASROCK G41M-S INSTANT DRIVER



ASROCK G41M-VS3

VGA D-Sub ports quantity: Ethernet interface type: Fast Performance Component for: PC Motherboard chipset: Intel G41 Motherboard form factor: You can Pay with: We deliver with: Our Communities. Newsletter Sign Up Asrock G41M-S Instant now for the latest products and special offers! Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Do not force to insert the CPU into the socket if above Asrock G41M-S Instant is found. Otherwise, the CPU will be seriously damaged. Step Disengaging Lift Lever Up to 90 the lever by depressing down and out on the Socket hookMarked Corner to clear retention tab.

Rotate the load lever to fully open po- sition at approximately degrees. Rotate the load plate to fully open po- sition at approximately degrees. Step 2.

Hold the CPU by the edges where are marked with black lines. Locate Pin1 and the two orientation key notches.

Asrock G41M-S Instant Pin1 Pin1 alignment key alignment key orientation orientation key notch key notch. Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Use your left hand index finger and thumb to support the Asrock G41M-S Instant plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal.

Asrock G41M-VS3 R Intel G41 Micro ATX DDR3-SDRAM Motherboard

It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This Asrock G41M-S Instant must be placed if returning the motherboard for after service. Step 4.

ASROCK G41M-S INSTANT DRIVERS FOR WINDOWS

Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, Asrock G41M-S Instant the load lever. Secure load lever with load plate tab under retention tab of load lever.

Asrock G41M-S Instant Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink.

MXGIA0PAYZ - ASROCK G41M-VS3 R M-ATX DDR3 SATA2 UB SKT VGA - ASROCK

G41M-S. Supports FSB/// MHz CPUs; Supports Dual XFast RAM, XFast LAN, XFast USB Technologies; Supports Instant Boot, Instant Flash.

ASROCK G41M-S INSTANT WINDOWS 8.1 DRIVER

Asrock G41M-S Instant Boot Utility downloads Asrock G41M-S Intel VGA Driver for Win7 x downloads.

Other Drivers