ASROCK FM2A55 PRO AMD DISPLAY DRIVER DETAILS:
|File Size:||32.3 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
ASROCK FM2A55 PRO AMD DISPLAY DRIVER
STEP 1: Install the SATA2 hard disks into the drive bays of your chassis. STEP 2: STEP 3: STEP 4: What is Hot Swap Function?
Please read below operation guide of Hot Plug feature carefully. Points of attention, before you process the Hot Plug: Please make sure the SATA2 driver is installed into system properly.
- Tootekataloog » ASRock FM2A55 Pro+ / AMD® A55 / Socket FM2+ / ATX
The latest SATA2 driver is available on our support website: Please follow below instructions step by step to reduce the risk of HDD ASRock FM2A55 Pro AMD Display or data loss. Points of attention, before you process the Hot Unplug: Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.
Set up UEFI. Not only will it make BIOS setup less difficult but also a lot more amusing. You may also restart by turning the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen. You can also navigate with a mouse. Please note that overclocking may cause damage to your components and motherboard.
It should be done at your own risk and expense. Configuration options: The default value is [Auto]. The default value is [Disabled]. Please be noted that overclocking may reduce the D-Sub resolution and cause the display abnormal situation. Spread Spectrum This item should always be ASRock FM2A55 Pro AMD Display for better system stability. The default value is [Enabled].
If [Enabled] is selected, the power consumption is reduced when overclocking. However, it is recommended to keep the default value for system stability. Boost Frequency Multiplier For safety and system stability, it is not recommended to adjust the value of this item. CPU Frequency Multiplier For safety and system stability, it is not recommended to adjust the value of this item. However, for safety and system stability, it is not recommended to adjust the value of this item. Bank Interleaving Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention. The default is ASRock FM2A55 Pro AMD Display.
Setting wrong wrong values values in in this this section section may may cause cause Setting the system to malfunction. Please note that enabling this function may reduce CPU voltage and memory frequency, and lead to system stability or compatibility issue with some memory modules or power supplies. Please set this item to [Disable] if above issue occurs. It allows you to select the type of Primary VGA in case of multiple video controllers. ASRock FM2A55 Pro AMD Display default value of this feature is [PCI Express].
ASROCK FM2A55 Pro NEW BUT OLD STOCK
Share Memory This allows you to set the share memory feature. Use this to enable or disable Dual Graphics feature. If you enable this option, the primary monitor will be onboard VGA. The default value of this option is [Disabled]. Hard Disk S. Use this item to enable or disable the S. Self-Monitoring, Analysis, and Reporting Technology feature. Serial Port Address Use this item to set the address for the onboard serial port.
ASRock FM2A55M-VG3 Compatible GPUs
Parallel Port Use this item to enable or disable the onboard parallel port. FM2A55 Pro Integrated AMD Radeon HD ASRock FM2A55 Pro AMD Display graphics in A-series APU Supports AMD Quad CrossFireX™, CrossFireX™ and Dual Graphics. FM2A55 Pro+ Integrated AMD Radeon™ R7/R5 Series Graphics in A-series APU Supports AMD Quad CrossFireX™, CrossFireX™ and Dual Graphics.