Type: Driver
File Name:
File Size: 25.4 MB
18 (3.82)
Downloads: 12
Supported systems: Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Celerity FC-41EL Downloads

Collecting debug output. Removing the Celerity FC host adapter driver and utilities.


Troubleshooting examples. ASP does not detect any of the Fibre Channel devices. Fibre Channel device is faulty.

ATTO Technology FCEL Technical data

Computer does not boot with the Celerity FC ATTO Celerity FC-41EL adapter installed. Server freezes or hangs. Escalation checklist. Table 1 Cross-reference links and email addresses Blue, underlined text: HP websites For additional information, see the following HP websites: To make comments and suggestions about product documentation, please send a message to storagedocsFeedback hp. All submissions become the property of HP. The Celerity FC host adapter 3.

Other ATTO drivers are not supported. Supported hardware and software Table 2 lists the supported hardware. A maximum of targets per host adapter channel are supported.

A maximum of logical unit numbers LUNs per host adapter channel are supported. PowerPC- and Intel-based servers are supported. Consider the following multipath guidelines: Consider the following Fibre Channel switch and fabric guidelines: Consider the following EVA storage system ATTO Celerity FC-41EL XCS 6.

  • ATTO Celerity FCEL - host bus adapter Specs - CNET
  • Atto Technology Ethernet Adapter Drivers Download - Update Atto Technology Software
  • Atto Technology Celerity FC-41EL Manuals
  • Shop by category
  • ATTO Technology, Inc. ATTO Celerity FC-41EL Fibre Channel Adapter driver download and installation

Setting up the host system To set up the host system: Install the Celerity FC host adapter 3. Reboot the host. For each host adapter channel: Connect the Fibre Channel cables from the host adapter ports to the Fibre Channel switch. Create a zone that contains: Table 4 provides sample values for a single host zone. You can add hosts to each zone. You do not need to create separate zones for each host. ATTO Celerity FC-41EL of the number of Celerity FC host adapter ports installed on a host, this round-robin technique includes all host adapter ports connected to the EVA storage system.

The following procedure describes how to zone a host for round-robin multipathing using two host adapter ports and two EVA ports: Create another zone that contains: Table ATTO Celerity FC-41EL provides sample values for a dual host zone. This section describes how to create the Mac host entry and present LUNs to the host. In the Hosts folder on the Storage System pane, click Add host.

By default, the host type is Fibre Channel. Enter the name of the host in the Name box.


For a Mac host, select Linux from the Operating System list. Click Add host. In the Hosts folder, select the host you created in Step 3. ATTO Celerity FC-41EL the Ports tab. Click Add port. Click OK. To add another port, repeat Step 9 through Step Note: During the adapter's initial install you will need to install the driver before updating the firmware with the latest flash bundle.

After the initial install we. Celerity Fibre Channel v - Windows Product Release ATTO Celerity FC-41EL Celerity FC 41EL ATTO Technology, Inc. is renowned for its technical support services.

Other Drivers